We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Stage Curtain Track Heavy Duty - Walk Along / Cord Operated
Flame Retardant
Stage Curtain Track Heavy Duty - Walk Along / Cord Operated - Ceiling Mounted Curtain Tracks - Metal Curtain Tracks - Tracks
Our walk along stage curtain track has been specifically selected for easy installation and the simplicity of its operation. A simple component based system that can be setup to work with a variety of installation options.
Please read the entire description below to ensure you are comfortable with how the product operates and should be installed.
The stage system comes with everything included within the kit to have 1 complete and operating track. The kit includes
- 1. Straight Track
- 2. T63760 End Stop (2 pairs per kit)
- 3. T63756 Ball raced runners (1 per 300mm of track)
- 4. T63750 Adjustable support brackets (1 per 1500mm of track)
Additional Components the ceiling clamp or wall bracket depending on how you wish to install the rail.
Simply configure your rail with the custom option choices.
Fixing Options for Stage Tracking
The stage track can be wall or top fixed. In a standard hall enviroment there will usually be a concrete ceiling or timber patrous to secure the ceiling saddles to. The hanging bolts then attach securely to these.
Alternativly the track can be wall fitted using 200mm 350mm or 500mm wall brackets.
The kit will come with these if selected as options. Depending on the length of track there will be (x) no of supports. An example calculation is 700cm track divided by 150cm for bracket spacing = 4.66 thus 5 brackets supplied to support.
How the Walk Along Curtain Track System operates
Overview of Weight Limits of Stage Curtain Track
Six Track will be installed at a height such that any failure would be hazardous.
Installation must be undertaken under the supervision of a competent person.
All suspension points must be assessed to ensure they are adequate to suspend the load.
Before starting the installation the load for each support should be calculated allowing for the weight of all the track and accessories as well as the curtain whether open or bunched or part bunched as during opening. Care must be taken to allow for loads imposed during operation, the load on a twin head pulley may be increased by up to 50KG due to the effect of the hauling line.
The maximum recommended length of a single span track is 10.0 metres and 18.0 metres for a overlap track system.
The maximum distance between track supports is approx 2.25m for open cloth and approx 1.60m for bunched cloth.
The max load per runner is 6.0Kg and has a recommended spacing of 300mm when the cloth is open. Swivel hooks are best used on the curtains instead of eyelets or ties.
Track Spacing
Connecting Sections
The following straight sections are available:
|
T63705 |
0.25m Straight |
|
|
|
T63706 |
0.50m Straight |
||
|
T63707 |
0.75m Straight |
||
|
T63708 |
1.00m Straight |
||
|
T63710 |
2.00m Straight |
||
|
T63715 |
3.00m Straight |
Custom lengths can be made to order or the track can be cut to length on site and used with a Bolt On End Plate or a Adaptor Plate. Each Six Track Straight section is supplied with a joint plate to aid alignment.
Operation Method for Tracking
| Delivery | 3 - 5 Days Delivery |
|---|---|
| Operation | Cord, Hand |
| Flame Retardant | No |
| Weight Guide | Stage 40kg+ |
| Colour | Black |
Write Your Own Review
How to Measure For Curtains, Blinds and Tracks..
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics, we recommend further to fully cover and more the window. Tested to 30cm
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The underside of the track |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but makesure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds goinng Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take thesmallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around